The last week, our patience wearing thin, we got down to business riding the shop pretty tightly on a daily basis. They actually got the running gear back together, the cutters came in and got installed, they fixed the fiberglass damage below the waterline from when Hannah wrapped the line around the prop, and we got dropped back in the water late Thursday afternoon! The whole week has been in the 90s and quite humid, so it has been pretty painful working from my little office on the boat. The fridges also haven't been keeping up, hovering around 50 degrees in the heat, so we've had to throw away anything vaguely temperature-sensitive. Turning the A/C on Thursday night was lifechanging, and I slept for ~10 hours that night, trying to make up for almost two weeks of way-too-hot fitful sleep.

While they were working on our boat, we received two freight shipments. First arrival was replacement lithium batteries. We originally ordered a slightly different model of the batteries, but ECPC made a mistake and sent us the wrong ones back in February, so we've been waiting for the correct ones for a few months to swap back out. After a bunch of hernia-inducing hauling around of all the batteries, I swapped everything back out, and we're basically exactly where we started, but I have the ability to tie the BMSes into the WS3000 now, for the future.

Next, we finally got our pallet of stuff sent from WA, with everything from the storage unit that we wanted out east -- clothes, tools, knick knacks, records, etc. We've spent much of the week with the boat a complete disaster of a mess merging the stuff from Seattle with everything already on the boat, but by the end of the week we'd mostly sorted through everything and put a bunch into storage, merged wardrobes, etc. It was a good excuse to actually throw away a bunch of extra hoarded spares (used wiring, used plumbing bits, stained clothing, etc.) and get some weight off the boat, now that our projects are mostly done.

Friday, now that we were in the water, we got down to our big unknown -- we're at around 975 hours on the motors, and so I wanted to get the 1000 hour service done while we were here. They got started on checking the starboard motor and immediately found some bad news: the injectors are all pretty gummed up, and the turbo has significant shaft play. Hannah and I were busy with work so we couldn't do any checking on things, but they checked their usual shops, and the turbo rebuilders are backed up by a month, and injector rebuilds are backed up several weeks.

While the news is bad, it's also not surprising. Since we got the boat, the starboard motor has always consumed significantly more fuel than the port motor -- over a gallon/hr more at basically anything above idle. And recently, it's started surging a bit at idle even when warm. So I had an inkling that something was up with the fuel injection system. It's annoying that we have yet more things that our fairly-useless engine surveyor didn't find on the PPI, but at least we have some answers about why that motor's been acting wonky. With how quickly the behavior has been worsening, it didn't feel worth the risk to continue north without fixing it right away, so we decided to stay tight and get some more information, about both motors, before proceeding.

I spent some time this weekend doing some research on the turbo and injectors, and found some other options to call early Monday morning and hopefully get some more options. But we may have some uncomfortable choices coming up between being down for another month to get things rebuilt, or coughing up for new parts to get under way much sooner and send away used parts for rebuilding to come back as spares/sell them off later. We're intending to be liveaboard on this boat for many years at this point, so it's not the end of the world if we get some prebuilt spares for critical components like this ready to go in the hold. We're going to be putting ~800-1000 hrs a year on the motors doing the loop repeatedly, which means we'll need turbo replacements and injector rebuilds each in a year or two anyway, so it's not totally wasted money.

In the meantime, we've been continuing to explore the Deltaville area a bit. The guy that I originally met here to sell the inverter to turns out to be a really nice guy with an interesting life story/mission, spending 3 years in the boatyard here completely rebuilding a 50 foot sailboat down to the hull and back up again, after sailing it 9000 miles from Europe. Check out their blog to read about their adventures. So we've been hanging out with Alex now and then in the evenings and exchanging stories of our respective projects.

This afternoon, we decided to check out the Deltaville Maritime Museum, since we've been riding by signs for it the last couple weeks. It was a neat museum talking about the extensive boatbuilding history of the area -- from the 1700s through to the early 1900s, the extensive timber of the area bred an industry of affordable and reliable boats that serviced the Chesapeake for centuries.

After returning from the museum, we spent some time in the sun on the roof of the boat trying to decide on a solar strategy. The boat came with 800 watts of old 2008-era solar panels, but we're looking to go way beyond that. I was originally going to go with a stack of newer rigid panels, but was getting uncomfortable with how much weight that was going to add way up high on the boat, so I've since leaned toward doing flexible panels again. The efficiency of the newer flexible panels is very similar to the solid panels, but they're a fraction of the weight, and much easier to mount to the roof. After being up top with a tape measure for a while, we decided to go with 15 of the Sunpower 170W flexible panels, giving us 2550 watts of theoretical power. I also may be able to fit a 16th one, but it's really close, so we'll order 16 and possibly just have one spare panel for down the line.

So now we just need to come up with a plan, once we talk to a million shops in the morning...